How To Flash Redmi 9AT (Just Around 7 Minute)

Advertisement

How To Flash Xiaomi Redmi 9AT – Flashing is crucial for some users that have problems with their devices, something like bootloop, or even a dead phone.

Advertisement

While these problems maybe can’t be solved by flashing, it’s still worth knowing an alternative to try to fix it by yourself first before you dump your phone to the service center.

How to flash Redmi 9AT

At this time, I will give you instructions on how to flash Xiaomi Redmi 9AT. You also can download all necessary files at down below.

Xiaomi Redmi 9AT comes as new series of “Redmi” phones. Here is few key specifications of Xiaomi Redmi 9AT:

  • Mediatek Helio G25 processor which runs on Octa-core (4×2.0 GHz Cortex-A53 & 4×1.5 GHz Cortex-A53)
  • 6.53-inch display with HD+ resolution
  • 2 GB RAM
  • 32 GB storage

Xiaomi Redmi 9AT uses a single-camera setup with 13 MP PDAF being the main camera. While the front camera of Xiaomi Redmi 9AT is 5 MP wide and placed at the center of the phone display.

Other specifications and features of Redmi 9AT include 5000 mAh Li-Po battery, USB Type-C, charge 10W, and many more.

Advertisement

Make sure you read it carefully everything I say before you applied to your Redmi 9AT. Do it with your own risk.

Some problem that may be fixed with flashing is:

Advertisement
  • Xiaomi Redmi 9AT bootloop
  • Xiaomi Redmi 9AT forgot password
  • Xiaomi Redmi 9AT lost MIUI password
  • Xiaomi Redmi 9AT restart continuously
  • Xiaomi Redmi 9AT hardbrick

Most of the problems that occur above are from yourself, but still, there is a little chance that is a system fault. So I hope this guide to flashing can fix all of your problems.

But flashing is not only about to fix a problem phone, but you also can try another ROM via flashing.

Some users prefer other ROM than an original one, just because they want a better experience. Alright, before we go-ahead to flashing point, let’s download some necessary files first.

FilesLink
Stock ROM MIUI Xiaomi Redmi 9ATDownload
USB Driver Xiaomi Redmi 9ATDownload
Mi Flash ToolDownload
Unlock Bootloader Xiaomi Redmi 9i

Beside that downloaded file, you also need to confirm that your phone already unlocked, otherwise you cannot should consider open that link above to know how to unlock bootloader your Redmi 9AT. But I suggest to try check your bootloader first.

Advertisement

How To Check Bootloader Status Xiaomi Redmi 9AT

First, you need to download adb file above and install it to your PC. After done, open C:\Program Files\Minimal ADB Fastboot then hold and press SHIFT + right-click on that folder. Choose an open command window here to process.

How To Flash Xiaomi

Now turn off your phone and start to enter fastboot mode by press and hold volume down and power button together until your screen turns into a picture like this.

Fastboot logo Xiaomi

Now finally connect your phone to your PC via USB cable and wait for your PC to read the phone. If it’s done, type this command to your cmd window to make sure your phone already connected:

fastboot devices

A random strings will show up if your phone is connected, if that happen then you can continue to type this command :

Advertisement
fastboot oem device-info

But if it’s turn out that your PC can’t read your phone, maybe you should try reinstall adb drivers to your PC or wait a little longer and recheck by typing first command.

How To Flash Xiaomi Redmi

Look at cmd screen, if Device unlocked: true then it’s mean your bootloader is already unlocked. While if the result shows false, then your bootloader is still locked for now and you need to unlock it to finally begin the flashing process.

Advertisement

Another reminder to fully backup your data first before continue.

How To Flash Xiaomi Redmi 9AT

Now if you are sure your phone bootloader already unlocked, then start reading the next instructions here. But a reminder that the next step will probably erase all of your data, so I suggest you do a full backup first before continue.

STEP #1. Install Xiaomi Redmi 9AT drivers and Mi Flash Tool that you are download back then.

STEP #2. Extract Stock ROM Xiaomi Redmi 9AT files to your PC.

STEP #3. Now open Mi Flash Tool and browse the location of your extracted Xiaomi Redmi 9AT ROM.

How To Flash Xiaomi Redmi

STEP #4. You can pick another options at down-right side of the apps, and some of them are:

Advertisement
Advertisement
  • “flash_all” choose this option if you want to clean flash, mean all of your data and apps were gone. (recommended)
  • “flash_all_except_data_storage” choose this option if you want to flash without losing your data, only your apps.
  • “flash_all_lock” choose this option if you want a clean flash then bootloader to be locked again.
How To Flash Xiaomi

STEP #5. If you’re done to picking, now turn off your phone and enter fastboot mode by press and hold volume down and power button together. Then connect your phone to your PC via USB cable.

STEP #6. Wait a second and hit repeat at Mi Flash Tool so the apps can read your phone.

STEP #7. If your phone already detected, now hit flash to begin flashing. Wait until the process end and your Redmi 9AT should restart by itself. Please note that the restart process will be a little longer than before.

Now if you are successfully unlocking bootloader and flash Xiaomi Redmi 9AT, maybe you can try to root Xiaomi Redmi 9AT. See you next time at HowToApps.info.

Also check for other articles :

Advertisement

Leave a Comment