How To Flash Vivo Y81 (Just 7 Minutes)


How to Flash Vivo Y81   – Actually, besides being able to fix various software problems in Vivo Y81 phones, flashing can also be used for other things. An example is updating the operating system to be newer or just trying a new custom ROM that is different from the original ROM / Firmware. Here I have also provided a download link for the ROM / firmware Vivo Y81 found below.


Vivo Y81 is one of the newest smartphones introduced by Vivo in June. This smartphone has a notch with screen measuring 6.22 inches, and resolution of 720 x 1520 pixels.

How To Flash Vivo Y81

Vivo Y81 comes with a Mediatek Helio P22 processor and PowerVR GE8320. Vivo Y81 runs on Funtouch OS 4 based on Android 8.1 Oreo.

Vivo Y81 comes with 3/4 GB RAM and 32/64 GB internal storage. One of the attractions offered by Vivo is the presence of good cameras on the rear with cheap price at about only 180 Euro.

This dual camera carries a 13 which is equipped with LED Flash. While the selfie camera use 5 MP. Other spesifications and features of Vivo Y81 are IPS LCD screen and 3260 mAh Li-Po battery.

Although the actual flashing process of the Vivo Y81 itself is not difficult, friends who want to try it must be more careful because if one chooses the firmware it could be that your cellphone cannot be turned on again, or commonly called the bootloop term.


While the flashing process of Android itself can be interpreted as a reinstall if applied to a computer or laptop. Flashing is commonly used to correct various problems such as

  • Vivo Y81 bootloop.
  • Vivo Y81 forgets passwords.
  • Vivo Y81 restarts itself.
  • Vivo Y81 only vibrates or
  • Vivo Y81 is totally off or hardbrick.

Actually the various problems above can be caused by the users themselves or even a small part due to system errors. And if a problem occurs as mentioned above, flashing is needed to fix it.


Before carrying out the flashing process of the Vivo Y81, note some of the requirements below.

  • I suggest to do the data backup process first because this process will eliminate all data in the cellphone.
  • The cellphone battery must be more than 50% so the process can run smoothly.
  • Download all files below.

ROM above is a global version of ROM, so there is Indonesian in it.

If all the above requirements succeed, you meet, now is the time to do the flashing process.

STEP #1.  Extract the file that was downloaded above and install the USB Driver on your computer by right-clicking> Run as Administrator.

The newest way to flash Oppo
Click channel, run as administrator

Select “Install this driver anyway” to continue the install process

the latest OPPO flash method
Pilih “Install Anyway”

The MTK USB Driver Install process works if there is a notification in the CMD window as below.

dear flash oppo
The USB installation process has been successful

STEP #2. Extract the file “Tool Flash Vivo” that was downloaded earlier, then install PDAnet.exe and CodeMeterRuntime.exe

STEP #3. Then open CodeMeter Control Center and select File> Import License> then select the VivoMsmDownloadToolNoneLic_2001.WibuCmRau file in the Vivo all tool folder.

dear flash oppo

STEP #4. If it’s correct, then the CodeMeter Control Center application will look like this.

dear flash oppo

STEP #5. After that, extract the downloaded firmware and right-click> run as administrator in the DownloadTool.exe application


The process of entering lisence above is useful to avoid the “CmDongle runtime error” warning that can occur when you first open the DownloadTool application. The following is the display of the DownloadTool application when it was first opened.

dear flash oppo
DownloadTool is accessing the Firmware file

STEP #6. Then press Start All and wait until the process is complete as shown below.

dear flash oppo
The firmware is ready to be flashed into the cellphone

STEP #7. Now when the cellphone is off, press and hold the volume button up and down simultaneously then plug it into the PC using a USB cable.

STEP #8. If all processes have been done correctly, the DownloadTool application will start the process of flashing the ROM or the latest Vivo Y81 firmware.

dear flash oppo
The flash process is running

STEP #9. Wait until the flash process ends, after the flash process has been successful at 100%, then the display of DownloadTool will be like this.

dear flash oppo
Successful flash process

STEP #10. The Vivo Y81 cellphone friend will reboot automatically when the flash process is complete, just wait until the phone turns on again. But remember, this reboot will take a little while, so please be patient.


If the flashing process stops at the yellow bar, then try to repeat installing the USB Driver or try to restart the PC first. After you finish flashing, you can try the Vivo Y81 root process . See you in my next article at

1 thought on “How To Flash Vivo Y81 (Just 7 Minutes)”

  1. Pingback: How To Root Vivo Y81 and Install TWRP Recovery •

Leave a Comment

Your email address will not be published. Required fields are marked *